An Overview of the ATSC 3.0 Physical Layer Specification

"(c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.")This paper provides an overview of the physical layer specification of Advanced Television Systems Committee (ATSC) 3.0, the next-generation digital terrestrial broadcasting standard. ATSC 3.0 does not have any backwards-compatibility constraint with existing ATSC standards, and it uses orthogonal frequency division multiplexing-based waveforms along with powerful low-density parity check (LDPC) forward error correction codes similar to existing state-of-the-art. However, it introduces many new technological features such as 2-D non-uniform constellations, improved and ultra-robust LDPC codes, power-based layered division multiplexing to efficiently provide mobile and fixed services in the same radio frequency (RF) channel, as well as a novel frequency pre-distortion multiple-input single-output antenna scheme. ATSC 3.0 also allows bonding of two RF channels to increase the service peak data rate and to exploit inter-RF channel frequency diversity, and to employ dual-polarized multiple-input multiple-output antenna system. Furthermore, ATSC 3.0 provides great flexibility in terms of configuration parameters (e.g., 12 coding rates, 6 modulation orders, 16 pilot patterns, 12 guard intervals, and 2 time interleavers), and also a very flexible data multiplexing scheme using time, frequency, and power dimensions. As a consequence, ATSC 3.0 not only improves the spectral efficiency and robustness well beyond the first generation ATSC broadcast television standard, but also it is positioned to become the reference terrestrial broadcasting technology worldwide due to its unprecedented performance and flexibility. Another key aspect of ATSC 3.0 is its extensible signaling, which will allow including new technologies in the future without disrupting ATSC 3.0 services. This paper provides an overview of the physical layer technologies of ATSC 3.0, covering the ATSC A/321 standard that describes the so-called bootstrap, which is the universal entry point to an ATSC 3.0 signal, and the ATSC A/322 standard that describes the physical layer downlink signals after the bootstrap. A summary comparison between ATSC 3.0 and DVB-T2 is also provided.Fay, L.; Michael, L.; Gómez Barquero, D.; Ammar, N.; Caldwell, MW. (2016). An Overview of the ATSC 3.0 Physical Layer Specification. IEEE Transactions on Broadcasting. 62(1):159-171. doi:10.1109/TBC.2015.2505417S15917162

Ye Ink Stand

Letters and comments from contributors and fans in Mythril #

Phenomenology of the superconducting state in Sr2RuO4

The symmetry of the superconducting phase of Sr2RuO4 is identified as the odd-parity pairing state d(k)=\hat{z}(k_x \pm i k_y) based on recent experiments. The experimental evidence for the so-called orbital dependent superconductivity leads to a single-band description of superconductivity based on spin fluctuation mechanism. It is shown that the state \hat{z}(k_x \pm i k_y) can be stabilized by the spin fluctuation feedback mechanism analogous to the A-phase in 3He and by spin-orbit coupling effects.Comment: 7 pages, 1 figure, to be published in Proc. of the conference "Anomalous Complex Superconductors" (Crete, 1998

Multi-Functional BN-BN Composite

Multifunctional Boron Nitride nanotube-Boron Nitride (BN-BN) nanocomposites for energy transducers, thermal conductors, anti-penetrator/wear resistance coatings, and radiation hardened materials for harsh environments. An all boron-nitride structured BN-BN composite is synthesized. A boron nitride containing precursor is synthesized, then mixed with boron nitride nanotubes (BNNTs) to produce a composite solution which is used to make green bodies of different forms including, for example, fibers, mats, films, and plates. The green bodies are pyrolized to facilitate transformation into BN-BN composite ceramics. The pyrolysis temperature, pressure, atmosphere and time are controlled to produce a desired BN crystalline structure. The wholly BN structured materials exhibit excellent thermal stability, high thermal conductivity, piezoelectricity as well as enhanced toughness, hardness, and radiation shielding properties. By substituting with other elements into the original structure of the nanotubes and/or matrix, new nanocomposites (i.e., BCN, BCSiN ceramics) which possess excellent hardness, tailored photonic bandgap and photoluminescence, result

2-Micron Pulsed Direct Detection IPDA Lidar for Atmospheric CO2 Measurement

A 2-micron high energy, pulsed Integrated Path Differential Absorption (IPDA) lidar has been developed for atmospheric CO2 measurements. Development of this lidar heavily leverages the 2-micron laser technologies developed in LaRC over the last decade. The high pulse energy, direct detection lidar operating at CO2 2-micron absorption band provides an alternate approach to measure CO2 concentrations. This new 2-micron pulsed IPDA lidar has been flown in spring of this year for total ten flights with 27 flight hours. It is able to make measurements of the total amount of atmospheric CO2 from the aircraft to the ground or cloud. It is expected to provide high-precision measurement capability by unambiguously eliminating contamination from aerosols and clouds that can bias the IPDA measurement

Long-term exposure to low concentrations of air pollutants and hospitalisation for respiratory diseases:A prospective cohort study in Australia

Background: Short- and long-term spatiotemporal variation in exposure to air pollution is associated with respiratory morbidity in areas with moderate-to-high level of air pollution, but very few studies have examined whether these associations also exist in areas with low level exposure. Objectives: We assessed the association between spatial variation in long-term exposure to PM and NO and hospitalisation for all respiratory diseases, asthma, chronic obstructive pulmonary disease (COPD), and pneumonia, in older adults residing in Sydney, Australia, a city with low-level concentrations. Methods: We recorded data on hospitalisations for 100,084 participants, who were aged >45 years at entry in 2006–2009 until June 2014. Annual NO and PM concentrations were estimated for the participants’ residential addresses and Cox proportional hazards regression was used to model the association between exposure to air pollutants and first episode of hospitalisation, controlling for personal and area level covariates. We further investigated the shape of the exposure-response association and potential effect modification by age, sex, education level, smoking status, and BMI. Results: NO and PM annual mean exposure estimates were 17.5 μg·m and 4.5 μg·m respectively. NO and PM was positively, although not significantly, associated with asthma. The adjusted hazard ratio for a 1 μg·m increase in PM was 1.08, 95% confidence interval 0.89–1.30. The adjusted hazard ratio for a 5 μg·m increase in NO was 1.03, 95% confidence interval 0.88–1.19. We found no positive statistically significant associations with hospitalisation for all respiratory diseases, and pneumonia while negative associations were observed with COPD. Conclusions: We found weak positive associations of exposure to air pollution with hospitalisation for asthma while there was no evidence of an association for all respiratory diseases

Inelastic neutron scattering study of magnetic excitations in Sr2_2RuO4_4

Magnetic excitations in \srruo ~ have been studied by inelastic neutron scattering. The magnetic fluctuations are dominated by incommensurate peaks related to the Fermi surface nesting of the quasi-one-dimensional $d_{xz}$- and $d_{yz}$-bands. The shape of the incommensurate signal agrees well with RPA calculations. At the incommensurate {\bf Q}-positions the energy spectrum considerably softens upon cooling pointing to a close magnetic instability : \srruo ~does not exhibit quantum criticality but is very close to it. $\omega / T$-scaling may be fitted to the data for temperatures above 30 K. Below the superconducting transition, the magnetic response at the nesting signal is not found to change in the energy range down to 0.4meV.Comment: 11 pages 9 figure

The contribution of geogenic particulate matter to lung disease in indigenous children

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. Indigenous children have much higher rates of ear and lung disease than non-Indigenous children, which may be related to exposure to high levels of geogenic (earth-derived) particulate matter (PM). The aim of this study was to assess the relationship between dust levels and health in Indigenous children in Western Australia (W.A.). Data were from a population-based sample of 1077 Indigenous children living in 66 remote communities of W.A. (>2,000,000 km2), with information on health outcomes derived from carer reports and hospitalisation records. Associations between dust levels and health outcomes were assessed by multivariate logistic regression in a multi-level framework. We assessed the effect of exposure to community sampled PM on epithelial cell (NuLi-1) responses to non-typeable Haemophilus influenzae (NTHi) in vitro. High dust levels were associated with increased odds of hospitalisation for upper (OR 1.77 95% CI [1.02–3.06]) and lower (OR 1.99 95% CI [1.08–3.68]) respiratory tract infections and ear disease (OR 3.06 95% CI [1.20–7.80]). Exposure to PM enhanced NTHi adhesion and invasion of epithelial cells and impaired IL-8 production. Exposure to geogenic PM may be contributing to the poor respiratory health of disadvantaged communities in arid environments where geogenic PM levels are high

Boron Nitride Nanotube: Synthesis and Applications

Scientists have predicted that carbon's immediate neighbors on the periodic chart, boron and nitrogen, may also form perfect nanotubes, since the advent of carbon nanotubes (CNTs) in 1991. First proposed then synthesized by researchers at UC Berkeley in the mid 1990's, the boron nitride nanotube (BNNT) has proven very difficult to make until now. Herein we provide an update on a catalyst-free method for synthesizing highly crystalline, small diameter BNNTs with a high aspect ratio using a high power laser under a high pressure and high temperature environment first discovered jointly by NASA/NIA JSA. Progress in purification methods, dispersion studies, BNNT mat and composite formation, and modeling and diagnostics will also be presented. The white BNNTs offer extraordinary properties including neutron radiation shielding, piezoelectricity, thermal oxidative stability (> 800 C in air), mechanical strength, and toughness. The characteristics of the novel BNNTs and BNNT polymer composites and their potential applications are discussed